#Europower pmp2000 problems plus

Inputs: Outputs: Channel EQs: Graphic EQs: Multi-FX Processor: Warranty Terms. External cable selection is unlikely to interact with the internal effects unit. Overview: The Behringer Europower PMP2000 is a 14-channel powered mixer. The symptoms your customer described sound like they are inside the unit. Using an unshielded speaker cable in place of an instrument cable can allow hum to corrupt the high impedance instrument level audio path, but speaker outputs are low impedance so hard to make noisy from cable selection. As such, I purchased a Behringer PMP2000 powered mixer (800W) and a couple of 12' Passive speakers (8 Ohms, 600W per unit). Please let us know if we can help in anyway.Д«EHRINGERClose but you have that completely backwards. Basically, our old one was a bit weedy, and were playing larger venues now so need something with more power.

#Europower pmp2000 problems plus

Seeing that the OP is located right in Las Vegas where our CARE team is, it might be worth his while to have it checked out. The EUROPOWER PMP2000 mixer delivers 800W of massive power and incredible performance through new-generation amplifier technology, crystal-clear sound plus an ultracompact and lightweight design. As others have indicated, there are a number of possible causes but one would need to examine the unit to know for sure. In this case, it does sound like the unit needs service, which is why I provided the information for contacting our CARE department. Assuming the OP is using a proper speaker cable, there is still the possibility that there is an issue with the connector on either side or somewhere else in the cable. One reason a cable could cause a problem is if it is not the proper cable, such as in the case of using an instrument cable for speakers. I had originally suggested checking the cable simply as a troubleshooting step.